russian 9mm pistol

Russian 9mm Pistol - (Russian: MP-443 Грач, lit. side arm.

Development is led by designer Vladimir Alexandrovich Yargin. The weapon was developed under the name "Grach" in response to Russian military tests that began in 1993. In 2003, along with the Prime Minister Makarov, the GSh-18 was adopted as the standard weapon of all branches of the Russian military and law enforcement. , and SPS.

Russian 9mm Pistol

The PYa is a high capacity, double action, short recoil semi-automatic pistol. The barrel/slide lock is a simplified Colt-Browning design similar to many modern pistols (such as SIG Sauer and the Glock family of pistols). The barrel break is rectangular, not round, and fits into the lock slot near the slide. Slide stops are installed on both sides of the tool to accommodate both left and right handed users. Likewise, the manual safety is not obvious, with a safety finger on either side of the gun. It is attached to the frame, under the rear slide and behind the slide stop lever. The hammer is partially hidden to prevent snagging on clothing and equipment. The magazine release catch is located at the base of the trigger guard on the left side and can be operated with the thumb (right-handed users) or the index or middle finger (left-handed users). The foreground is formed as a fixed part of the slide and cannot be adjusted. The background can be adjusted for wind (property type), but this requires a tool. Both have white contrast elements for easy shooting in low light conditions. The standard magazine capacity is 17 rounds and is a double-column, two-seat feed magazine. 18-round capacity magazine manufactured after 2004.

Beretta M9 Pistol

While the pistol grip is made of polymer, the rifle is mostly metal (stainless steel on the base, frame and slide are carbon steel).

It is chambered in the 7N21 9×19mm, the ubiquitous Russian 9mm pistol cartridge, which is equivalent to NATO's standard loading.

The weapon can also use 9x19mm Parabellum / 9mm Luger / 9x19mm NATO cartridges, including civilian loads with hollow ports for law enforcement (only full metal jacket cartridges are permitted for use in military weapons).

As of 2008, it was only available in small quantities to certain special forces units in the Caucasus region.

Baikal Russian 9mm ( Out Of Stock)

But due to financial issues and the Makarov pistol being very useful in Russia, the Makarov remains the main police service pistol in Russia.

Detectives from the Intelligence Center, which belongs to the Central Military District and is located in Siberia, were fully armed with Yargin pistols in early 2015.

Mass deliveries of PYa pistols to the Russian armed forces began in 2012. As of early 2016, thousands of these pistols were available. Officers are training to master the new weapon. However, the PM gun was not cancelled. Makarov Pistol or PM (Russian: Пистоле́т Мака́рова, t. пистолет макарова, IPA: [pʲɪstɐˈlʲet mɐˈkarəvə], lit. Inspired by Nikolai Fyodorovich Makarov, it became the standard Soviet army and militia sidearm in 1951.

Shortly after World War II, the Soviet Union resumed plans to replace the TT pistol and the Nagant M1895 revolver. Future adoption of the AK machine makes the pistol a lightweight and practical self-defense weapon. The TT is not suitable for such a role due to its weight and bulk. In addition, Tokarev's pistol was thought to be too easy to lose its grip and lose its magazine. As a result, two separate competitions for the new service pistols were established in December 1945, for the 7.62mm and 9mm pistols respectively. It was later determined that a new 9.2×18mm cartridge designed by B. V. Semin was the best round for the intended role. Low cartridge pressure allows direct recoil operation (reducing cost and weapon complexity) while maintaining low recoil and good stopping power.

Mp 443 Grach

Several factories participated in the competition: Korovin, Baryshev, Voivodin, Simonov, Rakov, Klimov, Lobanov, Severugin and Makarov. Particular attention is paid to safety, user comfort, accuracy, weight and size. After rigorous handling, reliability and other tests, the Makarov design, influenced by the German Walther PP,

It stands out from the rest with its simplicity, excellent reliability, quick installation and durability. During April 1948, Makarov's gun suffered 20 times less damage than its competitors, Baryshev and Severyugin, and had fewer parts. Therefore, the tool was selected for mass production and optimization in 1949. Tools for production were installed at the Izhevsk plant. After many major redesigns and modifications, the weapon was officially adopted in December 1951 as the "9mm Pistol Makarova" or "PM".

As the new standard weapon of the Soviet Union, the Premier was issued to non-commissioned officers, police, special forces, and tank and air force personnel. In 1991 he served extensively in the Soviet Union and abroad with the Soviet Army and Police. Variants of the pistol continued to be produced in Russia, China and Bulgaria. In the United States, surplus Soviet and East German military Makarovs are listed by the Bureau of Alcohol, Tobacco, Firearms, and Explosives as antiques and eligible souvenirs because the countries of manufacture, the Soviet Union, and the GDR no longer exist.

The prime minister is still the instrument of service in many Eastern European and former Soviet Union republics. North Korea and Vietnam also use the PM as their standard pistol, but North Korea has since replaced the locally produced CZ-75 with the BaekDuSan pistol.

Lebedev Pl14, The New Semiautomatic Pistol From The Kalashnikov Concern

Although a variety of pistols have entered Russian service to replace the Makarov, none have been able to replace it quickly. In September 2019, Rostec announced that the Udav pistol would replace the Makarov in mass production. Udav fires 9x21mm Gyurza bullets that penetrate 1.4mm thick titanium or 4mm thick steel at 100 meters.

The Premier is a medium sized, straight action, steel construction, fixed frame barrel pistol. In a recoil design, the only force that engages the slide is the return spring. When fired, the barrel and slide do not need to be opened, as with a locked cradle design pistol. Recoil designs are simpler and more accurate than designs using barrel recoil, bevels, or joints, but are practically limited by slide weight. The 9×18mm cartridge is the actual cartridge in a recoil-operated pistol. Produces a respectable level of ergy from a weapon of moderate weight and size. The PM is heavy in size by modern American commercial pistol standards, primarily because the heavier slide in a percussion pistol provides greater inertia to delay the breaking operation until the internal pressure drops to a safe level. Also, a more powerful cartridge was used in the design of the percussion pistol, but Makarov is considered very balanced in design elements.

However, the designer N. Makarov and his team greatly simplified the construction of the weapon, increased reliability and reduced the number of parts to 27, except for the magazine. This greatly facilitates production and service. All of Prime's individual components are optimized for mass production, rigidity and interchangeability, thanks in part to German tooling, technology and engineering.

The chrome-plated, four-barreled, 9.27mm caliber barrel is press-fitted to the frame using machined rings. The 7 kg harvester is spring rotated and guided by the barrel. The spring-loaded trigger guard slides down on either side of the frame to release the slide. The front sight is treated inside the slide, and a 3-4 mm wide fabric strip is placed on top of the wall to prevent glare from interfering with the shot. The background is compatible with the slide, and there are several heights to adjust the impact point. The puller is of the external spring type and has a protruding planet to prevent damage if the casing breaks. A broken face allows for reliable pick-up and drop-off. Sheet steel slide lock lever has tail. The fully-encased bakelite or plastic handle is reinforced with a steel clip and has a sub-band inside the screwdriver to prevent it from slipping during firing. A sheet metal base mounted inside the grip plate drives the hammer to the main and recoil shock, trigger and separator, while the lower d is the heel and magazine catch spring. The search spring also serves another function, enabling slide lock. Makarov pistol parts rarely fail under normal use, and can be easily serviced with a few tools.

The Makarov Pistol Or Pm Is A Russian Semi Automatic Pistol, It Became The Soviet Union's Standard Military And Police Side Arm Stock Photo

The PM has a free-floating, triangular-shaped ejection port with no firing springs or exhaust ports. This theoretically allows for the possibility

9mm tunnels, 9mm stretcher, 9mm plugs, 9mm blades, 9mm gauges, 9mm tunnel, 9mm bearing, laowa 9mm, 9mm moissanite, dymo 9mm, 9mm rivets, 9mm lashes